(+34) 647 812 195
|
The Denali D4 TriOptic™ LED Light is one of the most powerful LED lighting systems on the market today but draws only 6.6A (pair) at full power. This product is a single D4 quad light pod. The DENALI D4 kit (comprising two lights and all necessary cabling) is available here. DENALI Lights - EU ComplianceDENALI lights were originally designed for the USA market. Subsequently, due to demand, they were imported and marketed to the rest of the world, including the EU. EU rules are extremely restrictive and so the certifications had to be done in accordance with the performance of each light and not the intended use. Consequently the certifications are not realistically usable to homologate the products in Spain, apart from the D3 fog light which can be homologated. Nonetheless DENALI continue to be in demand in Spain due to their outstanding quality. Please note there is NO EU category for "auxiliary lights". Additional front-facing lights can only be homologated as "fog lights". "Headlight" replacement means that The EU compliance (E-Mark approval/homologation) documentation for all products can be downloaded from the DENALI website here.D2 Lights D3 Driving Lights D3 Fog Lights D4 Lights D7 Lights DM Lights DR1 Lights S4 Lights Product Contents
Specifications
Supports for DENALI lights: see the DENALI website for options.DENALI 2.0 Lights - Common CharacteristicsHigh Power LEDs - HiDrive™ The LEDs used in all DENALI 2.0 systems are the latest generation "Hi-Intensity" LEDs from Cree. Compared to the DENALI 1.0 series, these produce 20% more light (lumens) for the same low current consumption. Advanced Thermal Management - LiveActive™ LEDs last longer and output more light when they are kept cool. The DENALI 2.0 lights have advanced software control "LiveActive"™ integrated into the LEDs and external oversize heatsinks cast into the housing to maximise the efficiency minute-by-minute and ensure the longest lifetime. Multi-Beam Lens system - TriOptic™ All kits include two spot lenses and two flood lenses to allow a choice of three lighting patterns. Use two spot lenses for the maximum forward reach, two elliptical floods for maximum side spread, or one of each for a combined effect. In addition to providing three beam options in one kit, the second set of spot-only lenses are CE-certified. This ensures you can stay street-legal on-road while maintaining the option for maximum distance off-road. Fully Waterproof Construction - DrySeal™ The seals between the components of the housings are moulded silicon and the cable entry points are potted in epoxy to ensure the housings are 100% watertight even when submerged. The control switches (On/Off and Off/Low/High) are also 100% waterproof. Corrosion-Proof Bezels - Impact PC™ The front bezels always bear the brunt of stone damage and so the coated aluminium of the main housing is not always an appropriate material. The housing bezels are moulded in 100% polycarbonate (DR2, DM and DR1 only/not D4) for the best possible resistance to stone damage, providing a tough surface that does not rust or fade with the sun. Chromed Reflectors The internal LED holders are plated in high reflective chrome to focus all the generated light forward and to better match the bike's original headlights Low-profile mounts and stainless-steel fixings The hinged mounts are designed to reduce the installed profile to the minimum possible while maintaining high strength. All screws and nuts are manufactured in stainless-steel. Waterproof Switch – "DrySeal"™ All DENALI switches are completely waterproof to ensure a long lifetime in harsh, outdoor conditions. The switches can be mounted on a flat surface or a handlebar (22mm/25mm). HotSwap™ Wiring Harness The cabling uses high-quality waterproof components and allows a simple upgrade to dual intensity LEDs by the use of the DataDim™ Controller Relay (available here). Optional UpgradesDataDim™ Controller This relay allows the lights to be switched between Off/Low Intensity/High Intensity. The lights are switched Off/On by the standard switch included in this kit. The DataDim™ controller relay (available here) replaces the Single-Intensity relay that is included in the kit. DataDim™ Controller + Hi/Low/Off Switch This option provides full control of the lights independently of the main beam control. In some motorcycles it is impossible to use the main beam control and so this manually-operated switch is required. Switch Eliminator This allows the lights to automatically switch on with the ignition circuit, so are always on when riding. This option replaces the standard On/Off switch and is available here. Harness Extension This cable extends the length of the standard lighting harness by 61cm (24") and features the same high-quality waterproof connectors as the original DENALI cables. It is available here. Y-Splitter Kit If you wish to add one or two more lights to your existing DENALI system, the "Y" splitter kit makes that very easy. It is available here. Auxiliary LED Brake light The B6 LED auxiliary brake light is a great safety addition to your existing brake light to wake up those cage-drivers! The unit comprises six 0.5W LEDs in a very compact, low-profile housing and is available here. Genuine Reviews?: To write a review, a customer must log into their account and may only review a product they have previously purchased. We are confident that all reviews on this site are genuine.
by Martin (France)
Received rapidly, considering they are imported first ! Great product and easy to install and plug on a 1200GSAW with a CANSwitch !
For more information, please visit this product's webpage. Currently Viewing Product 8 of 19 Customers who bought this product also purchased... |
