Your Bike:

Scottoiler xSystem v3.0 - Automatic Chain Oiler (electronic) with biodegradable (green) oil

  • Model: SO-SO-8150-30
  • Manufactured by: Scottoiler

289,99€
(including IVA)

A generic image In stock

The Scottoiler xSystem 3.0 is the ultimate in "Fit and Forget" easy chain maintenance for motorcycles.

Comprising an "intelligent" combined oil reservoir and solenoid valve, the unit detects the bike's movement and starts/stops oiling automatically, to deliver a regulated flow of a clean, light biodegradable oil to the chain. The tiny but constant flow ensures that road dirt does not stick to the chain as with "traditional" chain grease and so prevents the premature wear that is considered "normal" for a chain-drive transmission.

The xSystems are the easiest Scottoiler system to install, requiring only a connection to the battery and include an industrial-strength adhesive support for the oil dispenser that can be shaped/fitted to almost any swingarm!

Scottoiler xSystem 3.0 Features

Auto Operation

No need to switch the xSystem on or off; the reservoir detects the bike's movement and starts to deliver oil automatically.

Easy to Use

The tank has fifteen flow rates selectable on the tank itself, which are available as 5 levels within three ranges allowing precise control in any conditions.

Easy Installation

Tank Installation

No need to remove the fuel tank, cut any engine tubes or make any connection to the engine vacuum as with the vSystem.

The tank can be connected directly to the battery or via a key-switched supply or via a power-distribution hub such as the HealTech Thunderbox and will not lose its configuration/will switch on automatically.

The tank can be fitted to any part of the frame or under the seat and will work in any inclination almost to horizontal, although the more vertical the tank, the more it can be filled/the further the range between refills.

The tank slots into a support bracket so it can be easily removed for refilling if necessary.

Oil Dispenser Fitting

The swingarm support for the oil dispenser can be cut and fitted to almost any shape of swingarm, even those exotic curved Ducati models! No need for screws, cable ties or glue!

Low Power Use

When the bike is switched off, the reservoir goes into a low-power standby mode automatically too, using only 0.087mA, which might discharge a battery in a year or so!
The xSystem con be manually switched off for bike storage/transportation.

Extended Range

The tank has a 60ml capacity which should last well over 2000km (depending on the flow rate selected)! The range can be extended by using the Traveller additional oil pouch.

The system lubricates automatically using a light oil that both cleans and lubricates at the same time. You can easily adjust the flow rate to the conditions, maintaining the transmission and the bike free of old, dirty grease, thereby increasing the life up the chain by up to 7 times.

More than 35 years on the market, the Scottoiler is recognised as one of the very few accessories that will add resale value to a bike and probably the only one that will pay for itself and save you money and time.

Look for an installation example in the Scottoiler Support Centre.

Benefits

  • increases the chain life by up to 7 times
  • keeps the wheel and the bike easily cleaned - no more sticky grease
  • save time and money by NOT cleaning, adjusting or changing the transmission
  • very efficient: one drop per minute is enough to protect the chain
  • travel more than 8,300km without refills (eSystem/xSystem + Traveller additional tank).
  • easy installation
  • for all types of bikes including fuel injection and two strokes
  • more than 35 years of experience and development

Comes with the standard injector that deposits oil to one side of the chain. For road bikes we recommend the Scorpion Dual Injector accessory.

Reviews Scottoiler xSystem 3.0

Bike Social

Bike Rider magazine

Scottoiler xSystem v2.0 - Kiwi Rider

Scottoiler xSystem - Review - Twisted Throttle

Scottoiler xSystem - Promotional Video

Installation

xSystem v3.0 Fitting Instructions (pdf) can be downloaded here.

xSystem v3.0 FAQ on the Scottoiler website.

  1. Choose a Location for the Reservoir

  2. Install the Reservoir

  3. Connect the Reservoir to the Battery

  4. Choose a Location for the Oil Dispenser

  5. Install the Oil Dispenser

  6. Install the Oil Tubing

  7. Filling the Tank

  8. Once filled, the oil in the reservoir must be forced down the delivery tubing to bleed the air from the tube, as shown with the Scottoiler vSystem.

Kit Contents

Unboxing the Scottoiler xSystem v3.0

For more information, download the instructions.

Replacement/spare parts are available by clicking on the part number in brackets.

  1. xSystem reservoir 60ml with integrated cabling (#1):
  2. xSystem tank support (#2)
  3. Tie wraps long x 4 (#3)
  4. Tie wraps shorts x 2, (#4)
  5. M5 Bolt, washers, nut (#5)
  6. Plastic washer/ring (#6)
  7. Flat Washer M5 (#7)
  8. Nut M5 (#8)
  9. Micro oil dispenser plate (#9)
  10. Jubilee clip for fixing oil tube to dispenser plate (#10)
  11. Multiform Dispenser support (#11)
  12. M6 Bolt (#12)
  13. M8 bolt (#13)
  14. Dispenser assembly (#14)
  15. Joint piece (#15)
  16. Injector Tubes x 2 (#16)
  17. Oil tube adhesive supports x 4 (#17)
  18. Alcohol cleaning wipes (#19)
  19. "Scottoil" green/biodegradable oil 250ml (#20)
  20. Filler tube (#21)

FAQ

Which version of the xSystem do I have?

  1. xSystem 1.0: electronic pump. Serial number up to X-009254
  2. xSystem 1.0: with improved housing. Serial number X-009255 to X-010400
  3. xSystem 2.0: gravity fed with solenoid valve. Serial number X-010401 - X-021209
  4. xSystem 2.0: with support for key-switched power. Serial number from X-01800
  5. xSystem 3.0: serial number from X-021210
    • Exterior housing more robust.
    • Inner seals improved to prevent leaks
    • Can be used with electric bikes/scooters
    • The unit retains its settings when unpowered. It can be used with a power distribution hub such as the HealTech Thunderbox or connected to a key/ignition-switched supply.
    • Faster response to the flowrate buttons
    • Greatly reduced power consumption for both normal and Standby operation

How does the Scottoiler xSystem v3.0 work?

The reservoir contains a sensor which detects movement and opens a solenoid valve to allow the oil to flow to the chain.
The frequency of the opening is set by the buttons on the tank, and automatically take account of the ambient temperature to keep the flow rate regular in different climates where the viscosity of the oil may change with temperature.

The xSystem v2/v3 is not a pump, it is gravity-fed as the vSystem but uses a solenoid valve to stop the flow instead of the vSystem vacuum-operated valve.

Do I need extra parts to fit to my bike?

No. The xSystem is universal since it does not require any connection to the engine (unlike the vSystem) and has an adaptable support for the oil dispenser.

Will the xSystem drain my battery?

The Standby Mode current drain is less than most alarms. If the bike is not to be used for a month or so, it is recommended to disconnect the battery in any case.

Current consumption:

when the reservoir/solenoid is active/allowing oil flow: 108mA

on standby: 0.087mA

switched off: <4µA

Can I connect it to a key-switched supply instead of direct to the battery?

Yes, the tank will resume oiling automatically and remembers the previous settings.

Can I extend the range of the xSystem with the Traveller additional tanks?

The Traveller can be used with the xSystem.
The older HCR Magnum (that installs behind the number plate) is not compatible with the xSystem.

Can I use the Scorpion Dual Injector with the xSystem?

The Scorpion can be added to any of the Scottoiler systems, it fits most swingarms.

Bike-Specific Installation Guides are available in the Scottoiler Support Centre.

Spare Parts for the Scottoiler xSystem

See the parts list above for links to the equivalent spare part/replacement.

PLEASE NOTE: This is a generic product which is displayed by default for all bike models. However, please check carefully the product description to confirm compatibility with your bike.





 



Customers who bought this product also purchased...