The DENALI D2 TriOptic™ LED Light kit provides an impressive 160m forward beam in a compact housing that is small enough to be mounted on a mudguard.
The system comprises two tough metal housings each equipped with a 10W Cree high-power LED and an oversized internal rear reflector. The housings are made from aluminium with a black powder-coated finish and have cooling fins cast into the body for maximum heat dissipation. The front bezels are tough polycarbonate for resistance against stone damage.
DENALI Lights - EU Compliance
DENALI lights were originally designed for the USA market. Subsequently, due to demand, they were imported and marketed to the rest of the world, including the EU. EU rules are extremely restrictive and so the certifications had to be done in accordance with the performance of each light and not the intended use. Consequently the certifications are not realistically useable to homologate the products in Spain, apart from the D3 fog light which can be homologated.
Nonetheless DENALI continue to be in demand in Spain due to their outstanding quality.
Please note there is NO EU category for "auxiliary lights". Additional front-facing lights can only be homologated as "fog lights".
"Headlight" replacement means that
The EU compliance (E-Mark approval/homologation) documentation for all products can be downloaded from the DENALI website here.
D3 Driving Lights
D3 Fog Lights
DENALI D2 Lights on a CBR250R
The kit includes two different pairs of lenses: two Spots and two Floods to provide three types of light coverage.
1 - Spot Beam Pattern
Each housing is fitted with the same Spot lens plates.
The housings are supplied from the factory with these lenses already fitted as this is the most common configuration.
This provides a 160m forward beam with 23m wide side-coverage.
2 - Spot-Flood Hybrid Beam Pattern
Each housing is fitted with a different lens plate: one with a Spot lens and the other with a Flood lens.
This provides a 123m forward beam with 30m wide side-coverage.
3 - Flood Beam Pattern
In this configuration, each housing uses the same Flood lenses.
This provides a 68m forward beam with 48m wide side-coverage.
How are the lights controlled?
The lights are controlled by a high-quality, waterproof On/Off switch, included in the kit.
It is also possible to use the lights at half intensity and/or controlled by the vehicle's original main-beam switch by using additional accessories (not included in the kit): see the Optional Upgrades section below.
Due the compact size of the D2 housings, they can be fitted to a mudguard or any suitable location on the bike.
Installation Instructions: English
DENALI D2 Installation on a Kawasaki KLR650
This kit includes:
Also Available (optional) Amber Lens Plates
Blue light is reflected by fog/water vapour/rain. The DENALI Amber Lens Plates filter out the blue component from the LED white light and so improve visibility in fog and rain.
This kit includes two pairs of lenses:
The amber lenses for the D2 lights are available here.
Supports for DENALI lights: see the DENALI website for options.
DENALI 2.0 Lights - Common Characteristics
High Power LEDs - HiDrive™
The LEDs used in all DENALI 2.0 systems are the latest generation "Hi-Intensity" LEDs from Cree.
Compared to the DENALI 1.0 series, these produce 20% more light (lumens) for the same low current consumption.
Advanced Thermal Management - LiveActive™
LEDs last longer and output more light when they are kept cool. The DENALI 2.0 lights have advanced software control "LiveActive"™ integrated into the LEDs and external oversize heatsinks cast into the housing to maximise the efficiency minute-by-minute and ensure the longest lifetime.
Multi-Beam Lens system - TriOptic™
All kits include two spot lenses and two flood lenses to allow a choice of three lighting patterns. Use two spot lenses for the maximum forward reach, two elliptical floods for maximum side spread, or one of each for a combined effect.
In addition to providing three beam options in one kit, the second set of spot-only lenses are CE-certified. This ensures you can stay street-legal on-road while maintaining the option for maximum distance off-road.
Fully Waterproof Construction - DrySeal™
The seals between the components of the housings are moulded silicon and the cable entry points are potted in epoxy to ensure the housings are 100% watertight even when submerged. The control switches (On/Off and Off/Low/High) are also 100% waterproof.
Corrosion-Proof Bezels - Impact PC™
The front bezels always bear the brunt of stone damage and so the coated aluminium of the main housing is not always an appropriate material. The housing bezels are moulded in 100% polycarbonate (DR2, DM and DR1 only/not D4) for the best possible resistance to stone damage, providing a tough surface that does not rust or fade with the sun.
The internal LED holders are plated in high reflective chrome to focus all the generated light forward and to better match the bike's original headlights
Low-profile mounts and stainless-steel fixings
The hinged mounts are designed to reduce the installed profile to the minimum possible while maintaining high strength. All screws and nuts are manufactured in stainless-steel.
Waterproof Switch – "DrySeal"™
All DENALI switches are completely waterproof to ensure a long lifetime in harsh, outdoor conditions. The switches can be mounted on a flat surface or a handlebar (22mm/25mm).
HotSwap™ Wiring Harness
The cabling uses high-quality waterproof components and allows a simple upgrade to dual intensity LEDs by the use of the DataDim™ Controller Relay (available here).
This relay allows the lights to be switched between Off/Low Intensity/High Intensity.
The lights are switched Off/On by the standard switch included in this kit.
The DataDim™ controller relay (available here) replaces the Single-Intensity relay that is included in the kit.
DataDim™ Controller + Hi/Low/Off Switch
This option provides full control of the lights independently of the main beam control.
In some motorcycles it is impossible to use the main beam control and so this manually-operated switch is required.
This allows the lights to automatically switch on with the ignition circuit, so are always on when riding. This option replaces the standard On/Off switch and is available here.
This cable extends the length of the standard lighting harness by 61cm (24") and features the same high-quality waterproof connectors as the original DENALI cables. It is available here.
If you wish to add one or two more lights to your existing DENALI system, the "Y" splitter kit makes that very easy. It is available here.
Auxiliary LED Brake light
The B6 LED auxiliary brake light is a great safety addition to your existing brake light to wake up those cage-drivers! The unit comprises six 0.5W LEDs in a very compact, low-profile housing and is available here.
Genuine Reviews?: To write a review, a customer must log into their account and may only review a product they have previously purchased. We are confident that all reviews on this site are genuine.
by Jean (France)
Good product, good packaging, excellent customer service.
Before ordering I needed some advice. I got top and detailed answers.
Most important, when a problem occurs there is 100% dedication to solve it. Thank you for your professionalism.
For more information, please visit this product's webpage.
Currently Viewing Product 4 of 16
Customers who bought this product also purchased...