Plug and play cable harnesses for the Healtech SpeedoHealer.
These harnesses plug directly into the speed sensor connectors of the bike requiring no additional installation (with the exception of the universal SH-U01). No extra cables are required, nor cutting or soldering.
Find the correct harness for your bike using the "Healtech Product Advisor" below.
If your bike is not listed, please use the SH-U01 universal harness or contact us (please detail the model/year of the bike and include clear photographs of the speed sensor connector showing the wire colours of both connectors).
- Honda X-ADV 2017 onwards
Due to the DCT, the Speedohealer cannot be installed between the speed sensor and the ECU. It must be installed between the ECU and the dashboard. Installation details here.
- Kawasaki Versys X300
If the pinion/chainwheel has been changed on this bike, the ECU gets confused about the automatic gear-change and so one SpeedoHealer is required to restore the speed signal to its original frequency.
Now the speedometer will have a significant error and so a second SpeedoHealer is required to correct the error for the speedometer. Installation details here (spanish).
- Yamaha MT-09 2017 onwards
A SpeedoHealer can be installed using the rear wheel speed signal between the ABS and principal ECU. However, due to the traction control being managed by the principal ECU, the Top Speed Button cannot be used on this bike.