Show Products for...

2013-2016


Image
"Tail Tidy" Licence Plate Holder - Triumph Street Triple, Daytona 675 2013 onwards

"Tail Tidy" Licence Plate Holder - Triumph Street Triple, Daytona 675 2013 onwards

Designed specifically for the Triumph Street Triple / Street Triple R and Daytona 675 [R] 2013-. This Tail Tidy is manufactured in 3mm aluminium, saving 1.6kg on the original support. This Tail Tidy includes a number plate light. This unit will accept either the original (OEM) indicators or micro (8mm) indicators: R&G Micro Indicators: - RG370 Bulb-type - ... more info
RG Racing -
RG-LP0133BK
112,00€
Bar-End Sliders - Triumph 675 2006 onwards

Bar-End Sliders - Triumph 675 2006 onwards

Compatible with: Triumph 675 2006-. R&G Racing Bar-End Sliders protect the handlebar and levers in the event of an accident or fall. Very easy to install, the crash protectors are manufactured from HDPE and designed to be resistant to wear and tear but also to quickly brake a sliding bike in the event of an accident at speed. How to find the right R&G ... more info
RG Racing -
RG-BE0026BK
Boot (scuff) Guards (5) - Triumph 675 Daytona 2013 onwards

Boot (scuff) Guards (5) - Triumph 675 Daytona 2013 onwards

These boot (scuff) guards are compatible with: Triumph 675 Daytona 2013 onwards. The kit is comprised of five protectors for the chassis and swingarm. R&G Racing Boot Guards are designed to protect the frame/swingarm from damage due to motorcycle boots. The flexible pads are designed to be unobtrusive but tough enough to withstand the wear and tear of ... more info
RG Racing -
RG-EZBG801BL
Carbon-Fibre Brake-Lever Guard - Triumph Daytona 675 2006 onwards

Carbon-Fibre Brake-Lever Guard - Triumph Daytona 675 2006 onwards

This carbon-fibre lever guard is compatible with the Triumph Daytona 675 2006-. Alternative moulded lever guards are available here: MLG0004 A Brake Lever Guard reduces the danger of touching the brake lever during close-contact manoeuvring, whether wheel-to-wheel racing or close filtering on the road between other vehicles. This R&G Racing Lever Guard is ... more info
RG Racing -
RG-LG0004C
180,00€
Cotton Reels Offset - Triumph Daytona 675, Street Triple

Cotton Reels Offset - Triumph Daytona 675, Street Triple

Compatible with the Triumph Daytona 675, Street Triple, Street Triple R. The bobbins supplied with this kit are black. These offset cotton reels are designed to overcome the possibility of a standard paddock-stand cotton reel fouling the exhaust can under extreme suspension travel. The cotton reel is mounted to a replacement anodised-aluminium bracket ... more info
RG Racing -
RG-CR0026BK
Crankcase cover (LHS) - Triumph 675 Daytona 2013-, Street Triple 675 2014-2016/765 2017 onwards

Crankcase cover (LHS) - Triumph 675 Daytona 2013-, Street Triple 675 2014-2016/765 2017 onwards

Compatible with the Triumph 675 Daytona 2013- onwards, Triumph Street Triple 675 2014-2016, Triumph Street Triple 765 (NOT RX) 2017- onwards. This crankcase cover fits on the LEFT side of the engine. This protector is also available in kit RG-KEC0050BK. Ever seen the prices of a new engine casing or the cost of removing debris from your engine? R&G Engine ... more info
RG Racing -
RG-ECC0141BK
Crankcase cover Race (LHS) - Triumph 675 Daytona 2013-, Street Triple 675 2014-2016/765 2017 onwards

Crankcase cover Race (LHS) - Triumph 675 Daytona 2013-, Street Triple 675 2014-2016/765 2017 onwards

Compatible with the Triumph 675 Daytona 2013- onwards, Triumph Street Triple 675 2014-2016, Triumph Street Triple 765 (NOT RX) 2017- onwards. This crankcase cover fits on the LEFT side of the engine. This protector is also available in kit RG-KEC0050R. This product is the "Race" version which has a small removeable/replaceable "puck" on the impact point as ... more info
RG Racing -
RG-ECC0141R
Crash Protectors no-cut Aero (race) - Triumph 675 Daytona 2013 onwards

Crash Protectors no-cut Aero (race) - Triumph 675 Daytona 2013 onwards

Designed specifically for the Triumph 675 Daytona 2013-. These bobbins have a reduced profile (width) to reduce aerodynamic drag. This may result in increased damage to the fairing in the event of a crash, compared to the road kit. The installation of these crash protectors does not require the drilling of the fairing. All products supplied by Motorvista ... more info
RG Racing -
RG-CP0333
222,00€
Crash Protectors no-cut Aero (road) - Triumph 675 Daytona 2013 onwards

Crash Protectors no-cut Aero (road) - Triumph 675 Daytona 2013 onwards

Designed specifically for the Triumph 675 Daytona 2013 onwards. The installation of these crash protectors does not require the drilling of the fairing. All products supplied by Motorvista include instructions in english and spanish. R&G Racing are the number one motorcycle crash-protection specialist in the UK, designing and manufacturing bespoke ... more info
RG Racing -
RG-CP0332
222,00€
Crash Protectors, White, Race - Triumph 675 Daytona 2013-2016

Crash Protectors, White, Race - Triumph 675 Daytona 2013-2016

Designed specifically for the Triumph 675 Daytona 2013-2016. The crash bobbins included in this kit are WHITE and round, not Aero style. This kit is intended for race use. The installation of these crash protectors requires drilling of the fairing. R&G Racing are the number one motorcycle crash-protection specialist in the UK, designing and manufacturing ... more info
RG Racing -
RG-CP0337WH
101,00€