Quickshifter easy harness - QSX-F2E

Quickshifter easy QSX-F2E harness for use with the Healtech iQSE-W1 module.

This QSX harness includes an electronics module integrated in the harness to prevent the ECU detecting the action of the quickshifter as a fault and displaying a “FI” error on the dash.

Please use the Healtech Product Advisor below to check this cable is compatible with your bike.

Please take great care in selecting the correct harness especially if you have an Aprilia/Suzuki which may require the QSX-P4B and not the QSH-P4B.

Notes

In general the harness recommended by the Advisor is simply the easiest one to install.
"QSH-Fxx": connect to the injectors.
"QSH-Pxx": connect to the coils.
"QSH-P2T/QSH-P4T": requires the coil power cable to be cut and bridged by this harness. The kit includes all necessary parts and instructions.
"QSX": include additional electronics in the harness itself. Some bikes detect the ignition cut and show a "FI" error. The additional electronics prevent this problem.
"QSR": include a replacement shift-rod (M6) where it has been found necessary for the installation of the ring sensor.